In my degree project, I explore the importance of distance and how our perception of distance is affected by our experiences.During my investigatory work I studied the relation between distance and experiences. Among other things I concluded that distance can refer to several different kinds of distances (for example spatial, temporal or social distances) and that experiences are what you?ve learnt of these distances. The importance of distance can be illustrated by highlighting the effects of the distance, i.e. experiences.My degree project resulted in a pair of interactive binoculars which are used for looking at an virtual world of illustrations in 360°; a world of illustrations where distance and the importance of distance is shown..

The cost of forwarding corresponds to about one tenth of the forestry industries raw material cost. This gives a motive to do good follow-ups to get a good overview of the forwarding distance and, thus, enable improvements. Follow-ups are also justified by the possibility to make more accurate calculations of the harvesting costs, if better estimations of forwarding distance are achieved. Today (2009) Stora Enso has GPS and vehicle-computers in most of their forwarders. These are used mainly for the forwarder to follow the tracks of the harvester and for the planning leader to see how the forwarder has been driving within the stand.

This thesis shows the result from investigations of methods that use distance vectors when matching pictures. The distance vectors are available in a distance map made by the Euclidean Distance Transform. The investigated methods use the two characteristic features of the distance vector when matching pictures, length and direction. The length of the vector is used to calculate a value of how good a match is and the direction of the vector is used to predict a transformation to get a better match. The results shows that the number of calculation steps that are used during a search can be reduced compared to matching methods that only uses the distance during the matching..

This is a master thesis work carried out at the Department of Energy and Environment atthe Division of Electric Power Engineering. The master thesis work describes the theoryof distance protection relaying in 130 kV meshed distribution networks. The main aim ofthe thesis was to construct an Excel application for calculation and documentation of thesettings for distance protection relays. The program is based on general methods forcalculating settings of the different zones for the distance relay and presents the settingsin simple graphics using quadrilateral characteristics.The reason for building an Excel based application is the great variety of distanceprotection relays in live networks. The manufacturers of distance protection relays makeprogram for documentation available, however, they are based on the typical settings forthe specific relays.

This thesis processes the work of developing CPU code and GPU code for Thomas Kaijsers algorithm for calculating the kantorovich distance and the performance between the two is compared. Initially there is a rundown of the algorithm which calculates the kantorovich distance between two images. Thereafter we go through the CPU implementation followed by GPGPU written in CUDA. Then the results are presented. Lastly, an analysis about the results and a discussion with possible improvements is presented for possible future applications..

What is e-leadership and how can it be framed in a distance context? How can work motivation be understood as a correlated theme? In prior leadership research and theory it has been taken for granted that leadership occurs in a face-to-face environment, so how to study leadership in a remote context? According to recent research, e-leadership defines this leader-member relation in this new arena, and a central focus of this research has been on communication. Communication is a central theme in the remote setting because it is the only interaction arena which allows leadership to be seen and understood. By conducting a case study in a multi media organization with distance working journalists as focus group this essay aims to bring a deeper understanding of how e-leadership works and how it effects work motivation. The field of media organizations is interesting to study as distance work is not an unusual working environment for journalists, and research has indicated that work motivation needs for these highly specified creative workers are somewhat differentiated from other, for example industrial workers, which implies that motivation theories urges an update.

This thesis processes the work of developing CPU code and GPU code for Thomas Kaijsers algorithm for calculating the kantorovich distance and the performance between the two is compared. Initially there is a rundown of the algorithm which calculates the kantorovich distance between two images. Thereafter we go through the CPU implementation followed by GPGPU written in CUDA. Then the results are presented. Lastly, an analysis about the results and a discussion with possible improvements is presented for possible future applications..

This thesis processes the work of developing CPU code and GPU code for Thomas Kaijsers algorithm for calculating the kantorovich distance and the performance between the two is compared. Initially there is a rundown of the algorithm which calculates the kantorovich distance between two images. Thereafter we go through the CPU implementation followed by GPGPU written in CUDA. Then the results are presented. Lastly, an analysis about the results and a discussion with possible improvements is presented for possible future applications..

This thesis processes the work of developing CPU code and GPU code for Thomas Kaijsers algorithm for calculating the kantorovich distance and the performance between the two is compared. Initially there is a rundown of the algorithm which calculates the kantorovich distance between two images. Thereafter we go through the CPU implementation followed by GPGPU written in CUDA. Then the results are presented. Lastly, an analysis about the results and a discussion with possible improvements is presented for possible future applications..

This thesis processes the work of developing CPU code and GPU code for Thomas Kaijsers algorithm for calculating the kantorovich distance and the performance between the two is compared. Initially there is a rundown of the algorithm which calculates the kantorovich distance between two images. Thereafter we go through the CPU implementation followed by GPGPU written in CUDA. Then the results are presented. Lastly, an analysis about the results and a discussion with possible improvements is presented for possible future applications..

This thesis processes the work of developing CPU code and GPU code for Thomas Kaijsers algorithm for calculating the kantorovich distance and the performance between the two is compared. Initially there is a rundown of the algorithm which calculates the kantorovich distance between two images. Thereafter we go through the CPU implementation followed by GPGPU written in CUDA. Then the results are presented. Lastly, an analysis about the results and a discussion with possible improvements is presented for possible future applications..

This report describes a study, description and testing of parts to an application adapted to the operating system Android. The application is supposed to measure the distance to a car ahead. Apart from distance measurements the ability of the application to calculate its own speed with the help of GPS is tested. From these two parameters, speed, distance and some constants the theoretical stopping distance of the car will be calculated in order to warn the driver if the car is too close to the car ahead in relation to its own speed and stopping distance.Tests were conducted on the different applications that were programmed and the result showed that the camera technique in the mobile phone itself limits the maximum distance of the distance measurement application. The max distance the tests in this thesis revealed was approximately 5 meters.

This thesis processes the work of developing CPU code and GPU code for Thomas Kaijsers algorithm for calculating the kantorovich distance and the performance between the two is compared. Initially there is a rundown of the algorithm which calculates the kantorovich distance between two images. Thereafter we go through the CPU implementation followed by GPGPU written in CUDA. Then the results are presented. Lastly, an analysis about the results and a discussion with possible improvements is presented for possible future applications..

The aim of this Master's thesis is to investigate the library needs of distance students. This user study has a student perspective and concentrates on the main question of which way library needs might be expressed by distance students. Associated topics addressed by this study include; the problem of learning centres lacking their own library support, how distance students look upon library support as a concept and whether distance students prefer public libraries or university libraries, and why they make this choice. These questions may give the answer to how distance students deal with information literacy. Theories chosen by the study are in the fields of pedagogical and library science, the social cultural theory by Roger Säljö and in Tom Wilson's theories on user studies and information needs.

This Bachelor Thesis in the area of Computer Science and Work Science describes the process of design and development of an IT-tool between the municipality of Ron-neby and TietoEnator a development and consultancy firm, the Gothenburg office. The thesis focuses mainly on the cooperation between the consultant designer and the local municipal. Through cooperation, the organisation is incorporated into the tool and the tool is incorporated into the organisation. Concepts that are central in this thesis are design, cooperation and tailoring. A question raised is, if distance work and extensive cooperation might be a good way of working in the process of design and development, when the organisation is being incorporated into the tool.